manualshive.com logo in svg

Vega VEGAPULS WL 61, Installation & Maintenance Instructions Manual, Page: 17 / 60

Share
Download
Vega VEGAPULS WL 61 Installation & Maintenance Instructions Manual Download Page 17

17

4 Mounting

VEGAPULS WL 61 • 4 … 20 mA/HART - two-wire

38061-EN-121011

Fig. 12: Rotation in the centre with ceiling mounting

Fig. 13: Adjustment of the angle of inclination in case of wall mounting

4.4  Instructions for installation

For tight installation of the version with plastic horn antenna with com-

pression or adapter flange, the following conditions must be fulfilled:
1.  Use suitable flat seal, e.g. of EPDM with Shore hardness 25 or 50
2.  Make sure the number of flange screws corresponds to the num-

ber of flange holes

3.  Tighten all screws with the torque stated in the technical data

The emitted radar impulses of the radar sensor are electromagnetic 

waves. The polarisation plane is the direction of the electrical wave 

component. By turning the instrument in the connection flange or 

mounting strap, the polarisation can be used to reduce the effects of 

false echoes.
The position of the polarisation level is marked by marking bars on the 

instrument.

Tight installation of the 

plastic horn antenna

Polarisation plane

Summary of Contents for VEGAPULS WL 61





























































Reviews:

No comments