22
7 Operating modes, activate, device functions
VEGAPULS Air 41 • Autarkic device with measured value transmission via radio technology
64808-EN-210426
1
2
Fig. 14: Activate the sensor
1 Adjustment tool, e.g. smartphone
2 Contact surface for NFC communication
The app confirms successful activation and the device is ready for a
radio connection for 60 seconds.
Via magnet
Proceed as follows for activation by magnet:
1. Hold the magnet next to the lettering "
VEGA
" close to the side of
the device
2. Move the magnet as shown below along the line towards the
housing lid
AC
TIV
ATI
ON
Ma
gnet
AC
TIV
ATI
ON
Ma
gne
t
1
2
Fig. 15: Activate sensor by magnet
1 Contact point for activation
2 Magnet
The device is ready for a radio connection for 60 s.
Note:
If no Bluetooth connection is established within these 60 seconds,
the device automatically returns to sleep mode. If an established
Bluetooth connection is interrupted, a new connection is possible for
a further 10 seconds, etc.
7.3 Network Join, measurement function
After activation, the VEGAPULS Air 41 - if set to LoRa and an exist-
ing LoRaWAN network - carries out an automatic, single join to the
network server. The device is added to the network as an end device
by means of Device EUI and Application EUI.
Network Join (LoRa)
