36
5 Mounting
VEGAPULS 6X • Two-wire 4 … 20 mA/HART
66190-EN-221107
Distance d (m)
2°
4°
6°
8°
10°
110
3.8
7.7
11.5
15.3
19.1
120
4.2
8.4
12.5
16.7
20.8
Example:
In a vessel 20 m high, the installation position of the device is 1.4 m
from the vessel centre.
The necessary angle of inclination of 4° can be read out from this
table.
Proceed as follows to adjust the angle of inclination with the swivelling
holder:
1. Loosen the terminal screws of the swivel holder by one turn. Use
a hexagon socket wrench, size 5.
1
Fig. 35: VEGAPULS 6X with swivelling holder
1 Terminal screws (6 pieces)
2. Align the device, check angle of inclination
Note:
The max. angle of inclination of the swivelling holder is approx. 10°
3. Re-tighten the terminal screws, max. torque see chapter "
Techni-
cal data
".
¿Á̹ÌÇÊËÁÆÌÀ½Î½Ë˽Ļ¹ÆʽŴ½»ÌÌÀ½Å½¹ËÍʽŽÆÌËÁ¿Æ¹Ä¹Æ¼ÌÀÍË
lead to undesired incorrect measurements.
Note:
To avoid this, a false signal suppression should be carried out with the
¹¿Á̹ÌÇÊËÁÆÅÇÌÁÇÆƖÀÁ˽ÆËÍʽËÌÀ¹ÌÌÀ½ÁÆ̽ʾ½ÊÁƿʽŴ½»ÌÁÇÆ˾ÊÇÅ
ÌÀ½¹¿Á̹ÌÇÊ˹ʽ˹ν¼ÏÁÌÀÌÀ½ºÄ¹¼½ËÁƼÁŰ½Ê½ÆÌÈÇËÁÌÁÇÆËƖ
Agitators
