47
6 Set up with the display and adjustment module
VEGAPULS 64 • 4 … 20 mA/HART - two-wire
51141-EN-160815
With the adjustment software PACTware and the PC, the stored echo
curves can be displayed with high resolution and used to recognize
signal changes over time. In addition, the echo curve saved during
setup can also be displayed in the echo curve window and compared
with the current echo curve.
In this menu item, the internal clock of the sensor is set to the request-
ed time and time format. At the time of shipment from factory, the
instrument is set to CET (Central European Time).
During a reset, the parameter settings carried out by the user are
reset to the default values (see below table).
Proceed as follows:
1. Select with
[->]
under "
Additional adjustments
" the menu item
"
Reset
" and confirm with
[OK]
.
2. Confirm with
[OK]
and select the requested reset function with
[->]
3. Confirm with
[OK]
, for approx. 5 s the message "
Resetting
" is
displayed, then the selection window appears.
Caution:
For the duration of the reset, the set trouble signal is outputted via the
current output. Within the context of the asset management function,
the message "
Maintenance
" is outputted.
The following reset functions are available:
Delivery status:
Restores the parameter settings at the time of ship-
ment from the factory, incl. the order-specific settings. Any created
false signal suppression, user-programmable linearization curve as
Additional adjustments -
Date/Time
Additional adjustments
- Reset
