20
7 Set up with the integrated display and adjustment unit
VEGAMET 341 • 4 … 20 mA
63730-EN-210616
Description
Basic settings
Options
Display options e.g. brightness, contrast, illumina-
tion
Menu language
Language settings
Description
Basic settings
Fail safe relay
Activate/deactivate fail safe relay
Access protection
Access protection for Bluetooth and protection of
the parameter adjustment
Reset
Reset of the device
Description
Basic settings
Status
Status indication, e.g. device, sensor, relay
Simulation
Simulation function
Device-TAG
Display device name
Device information
Device information, e.g. serial number
7.4 Setup steps
Through parameter adjustment, the instrument is adapted to the indi-
vidual application conditions. A measurement loop calibration is the
most important step and should always be carried out. A scaling of
the measured value to the desired physical variable and unit, possibly
including a linearisation curve, is often useful. The adaptation of the
relay switching points or the setting of an integration time to smooth
the measured value are further standard adjustment options.
Information:
When using PACTware and the respective DTM or the VEGA Tools
app, additional settings can be carried out which are not possible or
only partly possible with the integrated display and adjustment unit.
Communication takes place via the built-in Bluetooth interface.
The device is configured ex works for universal applications. The
following applications can be changed over and configured via the
VEGA Tools app or the DTM:
•
Universal
•
Level storage tank
•
Wells
•
Pumping station
•
Sewage screw lifting station
•
Flow measurement flume/weir
Information:
An overview of the available applications and functions can be found
in the appendix
Extended functions
Diagnostics
Parameter adjustment
Applications
