26
9 Supplement
VEGACAP 64 • Two-wire
30015-EN-230510
9 Supplement
9.1 Technical data
Note for approved instruments
The technical data in the respective safety instructions which are included in delivery are valid for
approved instruments (e.g. with Ex approval). These data can differ from the data listed herein, for
example regarding the process conditions or the voltage supply.
All approval documents can be downloaded from our homepage.
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread
316L, steel C22.8 (1.0460), Alloy C22 (2.4602)
Ʋ Process fitting - flange
316L, PTFE plated
Ʋ Process seal
Klingersil C-4400
Ʋ Insulation (fully insulated)
PTFE
Ʋ Probe (rod PTFE fully insulated:
ø 16 mm/0.63 in)
316L
Materials, non-wetted parts
Ʋ Plastic housing
Plastic PBT (Polyester)
Ʋ Aluminium die-cast housing
Aluminium die-casting AlSi10Mg, powder-coated (Basis:
Polyester)
Ʋ Stainless steel housing (precision
casting)
316L
Ʋ Stainless steel housing (electropol-
ished)
316L
Ʋ Seal between housing and housing lid Silicone
Ʋ Ground terminal
316L
Ʋ Cable gland
PA, stainless steel, brass
Ʋ Sealing, cable gland
NBR
Ʋ Blind plug, cable gland
PA
Process fittings
Ʋ Pipe thread, cylindrical (DIN 3852-A) G¾, G1, G1½
Ʋ Pipe thread, conical (ASME B1.20.1) ¾ NPT, 1 NPT, 1½ NPT
Ʋ Flanges
DIN from DN 20, ASME from 1"
Weight
Ʋ Instrument weight (depending on
process fitting)
0.8 … 4 kg (0.18 … 8.82 lbs)
Ʋ Rod weight: ø 16 mm (0.63 in)
1100 g/m (12 oz/ft)
Sensor length (L)
Ʋ Process fitting: thread and flanges
0.15 … 6 m (0.492 … 19.69 ft)
Ʋ Process fitting: Flanges - PTFE plated 0.15 … 6 m (0.492 … 19.69 ft)
Max. lateral load
10 Nm (7.4 lbf ft)