4
2 Mounting
Screening tube adapter • for VEGACAL 63, 64/VEGACAP 63
34849-EN-130916
4.
Screw the screening tube adapter (3) onto the thread of the probe
and tighten with 100
Nm (74
lbf
ft) (SW
46)
The mounting of the screening tube adapter is now finished. The
probe can now be installed.
You can find the mounting procedure in the operating instructions of
the probe.
Note:
The VEGACAP probe must be re-compensated after mounting the
screening tube adapter. Use the compensation key on the electronics
module. You can find the instructions for this in the operating instruc
-
tions of the probe.
2.2 Version: capacitive screening, vacuum-tight
1
2
3
4
5
Fig. 2: Mounting of the screening tube adapter - capacitive screening, vacuum-
tight
1 Probe
2 Process seal
3 Screening tube adapter
4 O-rings (2 pcs.)
5 Pressure screw
