12
5 Set up with the display and adjustment module
VEGABAR 86 • Foundation Fieldbus
46323-EN-210430
1
2
Fig. 8: Installing the display and adjustment module in the double chamber
housing
1 In the electronics compartment
2 In the connection compartment
Note:
If you intend to retrofit the instrument with a display and adjustment
module for continuous measured value indication, a higher lid with an
inspection glass is required.
5.2 Parameter adjustment - Quick setup
To quickly and easily adapt the sensor to the application, select the
menu item "
Quick setup
" in the start graphic on the display and
adjustment module.
Carry out the following steps in the below sequence.
You can find "
Extended adjustment
" in the next sub-chapter.
Application
In this menu item, you activate/deactivate the Secondary sensor for
the electronic differential pressure and select the application. The ap-
plication comprises process pressure and level measurement.
Units
In this menu item you determine the adjustment and temperature
units of the instrument. Depending on the selected application in the
menu item "
Application
", different adjustment units are available.
Quick setup - Presettings
