6
S
et up with the indicating and adjustment
module
PLICSCOM
6
.
1
S
hort description
T
he indicating and adjustment module is used for measured value
display
,
adjustment and diagnosis
.
I
t can be mounted in the following
housing versions and instruments
:
l
A
ll continuously measuring sensors in single as well as double
chamber housing
(
optionally in the electronics or connection
compartment
)
l
E
xternal indicating and adjustment unit
N
ote
:
Y
ou can
fi
nd detailed information on the adjustment in the operating
instructions manual
"
I
ndicating and adjustment module
"
.
6
.
2
I
nsert indicating and adjustment module
T
he indicating and adjustment module can be inserted into the sensor
and removed again at any time
.
I
t is not necessary to interrupt the
power supply
.
P
roceed as follows
:
1
U
nscrew the housing cover
2
P
lace the indicating and adjustment module in the desired position
on the electronics
(
you can choose any one of four di
ff
erent
positions
-
each displaced by
90
°
)
3
P
ress the indicating and adjustment module onto the electronics
and turn it to the right until it snaps in
.
4
S
crew housing cover with inspection window tightly back on
R
emoval is carried out in reverse order
.
T
he indicating and adjustment module is powered by the sensor
,
an
additional connection is not necessary
.
M
ount
/
D
ismount indica
-
ting and adjustment mo
-
dule
34
VEGABAR
67
•
4
...
20
m
A
/
HART
-
climate compensated
6
S
et up with the indicating and adjustment module
PLICSCOM
39444
-
EN
-
110916
