manualshive.com logo in svg

Vega VEGABAR 28, Operating Instructions Manual

Share
Download
Vega VEGABAR 28 Operating Instructions Manual Download Page 13

13

3 Product description

VEGABAR 28 • Three-wire 1 x transistor or 4 … 20 mA

57534-EN-220826

• 

Not in the open

• 

Dry and dust free

• 

Not exposed to corrosive media

• 

Protected against solar radiation

• 

Avoiding mechanical shock and vibration

• 

Storage and transport temperature see chapter " 

Supplement - 

Technical data - Ambient conditions

" 

• 

Relative moisture 20 … 85 %

3.5 Accessories

The instructions for the listed accessories can be found in the down-

load area on our homepage.

Welded sockets are used to connect the devices to the process.

Threaded and hygienic adapters enable simple adaptation of devices 

with standard threaded fittings to process-side hygiene connections.

The suitable mounting accessories for VEGABAR 28 includes si-

phons, blocking valves and measuring instrument holders. 

Storage and transport 

temperature

Welded socket, threaded 

and hygienic adapter

Mounting accessories

Summary of Contents for VEGABAR 28

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands