23
device will simply send each packet as many times as specified in this option. If "Confirmed uplinks" function
is enabled, the device will send packets until it receives a confirmation or until it sends as many packets as
specified in this option.
Figure 20 — Choice of the uplink number
3.5.2.8 «TX power» (not displayed in the "Simple" mode) – the device RF transmitter power has
adjusted to this value when sending packets to the LoRaWAN network (fig. 21). This option can be change
by the network server.
Figure 21 — Choice of the TX power
3.5.2.9 «TX datarate» (not displayed in the "Simple" mode) – the device transmission datarate at
which it will transfer packets to the LoRaWAN network (fig. 22). This speed can be changed by the network
server if the ADR algorithm has enabled.
Figure 22 — Choice of the TX datarate
