15
3.3.2 OPTICAL PORT ACTIVATION
Launch the program and activate optical port.
For optical port activation the magnet getting on external magnetic field reception area during short
time (less than 2 seconds). Whereupon the optical port activates for the 20 seconds. “Optical port-USB”
adapter must be located and fixed for an operation time as it shown on figures 7,8.
Figure 7 — “Optical port-USB” adapter location in relation to meter_
General view
Figure 8 — “Optical port-USB” adapter location in relation to meter_
Close-up
At the main window of the application, you need to choose the device model (“Vega SHVE/SGVE
v.2”), COM-port number and press “Connect” button (fig. 9) while optical port is active.
Figure 9 — The main settings view for connection the device
Application connects to the device and device selection menu becomes inactive.
To read the settings from the device, you need to click the "Get settings" button (fig. 10), until this
point the application will display the default settings or from the last connected device.
