VeEX VePal CX350, User Manual

Page: 59 / 81

ARP Wiz uses the Address Resolution Protocol (ARP) to verify the status of each IP address in a user-selectable IP range. ARP is
the standard method for finding a host's hardware address when only its network layer address is known. In other words, ARP is
used primarily to translate IP addresses to Ethernet MAC addresses. ARP is defined in RFC826 .
Setup:
Profile - Recall an address stored as a profile or enter a desired IP address
Source address - Enter the IP address range
Destination address - Enter the IP address range
Time-out
Press ‘Start’
ARP Wiz Setup
Go back to top Go back to TOC
Result:
The MAC addresses associated with active IP addresses in the range are displayed.
ARP Wiz Result
CX350 e-Manual D07-00-037 RevC01 Page 59 of 81