Level
This field displays measured level of received signal.
Settings
Press ‘Enter’ to entering to “Voice function settings” submenu.
Voice function settings
This submenu defines the Voice processing parameters.
T/S send
The T/S send field allows user to specify timeslot into which audio information from selected source will be
transmitted.
Note: T/S selected in Line Interface menu for BERT measurement cannot be selected for voice testing.
Source
Select the source of transmitted audio data:
Off
: Voice function is disabled.
Mic
: Insert audio data from the microphone.
1 KHz
: Insert harmonic 1000 Hz signal.
CAS
Figure 5.6:
“Voice functions settings” menu
Figure 5.7:
“T/S send” mode
Page 17 of 30
TX50e e-Manual D07-00-009 REVA00
