VeEX RXT-6000e, User Manual

Page: 14 / 387

3.0 Introduction
The RXT-6200 and RXT-6000e test module is equipped with most common transceiver form-factor ports and optional
legacy test interfaces. It offers up to two simultaneous 100GE tests.
Installation, commissioning, monitoring, and maintenance tasks are simplified thanks to a combination intuitive
features and powerful test functions. Novice users benefit from the easy-to-use GUI, while experienced users will
appreciate an array of advanced features such as OTL/PCS, CAUI-4/XLAUI Lane BERT, overhead monitor/control,
Tandem Connection Monitoring, Service Disruption, Protocol Capture/Decode, BERT, Throughput test, and much
more.
RXT-6200
Platform Highlights
Independent Dual-Port testing, up to 2x 112G
CFP4 (LR4 & SR4) and QSFP28 interfaces for 100GE, OTU4 and 50GE applications
Supports IEEE 802.3bj Clause 91 RS-FEC as required for SR4
QSFP+ for 40GE, OTU3
SFP28 interface for 25GE, 32/16G FC, 24G CPRI 10 and 25G eCPRI Layer 4 with RS-FEC
SFP+ for 100Base-FX, 1000Base-X, 10GEBase-X, OTU2/2e/1e/1, STM-64/16/4/1/0, OC192/48/12/3/1, and
Fiber Channel 16/10/8/4/2/1G and CPRI up to 12G
RJ45 for 10/100/1000Base-T applications
RXT-6000e
Platform Highlights
CFP2 (LR4 & SR10) and QSFP28 interfaces for 100GE, OTU4 and 50GE applications
Supports IEEE 802.3bj Clause 91 RS-FEC as required for SR4 and SR10
CFP4 support via CFP2-to-CFP4 adapter
QSFP+ for 40GE, OTU3
SFP28 interface for 25GE, 32/16G FC, 24G CPRI 10 and 25G eCPRI Layer 4 with RS-FEC
SFP+ for 100Base-FX, 1000Base-X, 10GEBase-X, OTU2/2e/1e/1, STM-64/16/4/1/0, OC192/48/12/3/1, and
Fibre Channel 16/10/8/4/2/1G and CPRI up to 12G
RJ45 for 10/100/1000Base-T applications
Optional PDH/DSn with standard connectors
Go back to top Go back to TOC
RXT-6200_RXT6000e_Module_Manual Page 14 of 387