63
Reports
System Reports
System reports are accessed from the System Status (Home) Screen (see page 5) by touching one of the four report
buttons at the bottom of the screen. Table 4 describes the available System reports.
Table 4:
System Reports
Report Button
Report
Report Parameters
Touch to display Inventory and Shift Inventory
Reports for each tank. You can touch the Print but-
ton on the display to print the report to a connected
printer.
INVENTORY REPORT (Non-Density Probe)
Fuel Volume, TC Fuel Volume, Ullage, Fuel
height, Water Height and Fuel Temperature.
See example on page 65.
INVENTORY REPORT (Density Probe)
Fuel Volume, Mass, Density, Fuel height, Water
Height and Fuel Temperature.
See example on page 66.
Touch to display the Hourly Inventory Report for a
selected tank. Touch the Print button to print the
report to a connected printer.
HOURLY INVENTORY REPORT
Date, Hour, Volume, Height, Water, Temp
See example on page 66.
Touch to display Delivery Reports for each tank.
Includes last delivery and up to previous 9 deliver-
ies. You can touch the Print button on the display to
print the report to a connected printer.
DELIVERY REPORT (Non-Density Probe)
Start Date, Time, Volume, TC Volume, Water
Height, Fuel Temp and Fuel Height
End Date, Time, Volume, TC Volume, Water
Height, Fuel Temp and Fuel Height
Increase Volume Amount and TC Volume
Amount
See example on page 67.
DELIVERY REPORT (Density Probe)
Start Date, Time, Volume, Mass, Density,
Water Height, Fuel Temp and Fuel Height
End Date, Time, Volume, Mass, Density, Water
Height, Fuel Temp and Fuel Height
Increase Volume Amount and Mass Amount
See example on page 68.
Touch the Power Outage Delivery Report button to
display deliveries to the selected tank that occurred
when the TLS2P was powered down. It will contain
up to 5 power outage deliveries per tank.
POWER OUTAGE DELIVERY REPORT
Start Date, Time, Volume;
End Date, Time, Volume
Amount