5
System Setup Screens
This section describes all of the TLS2P System Setup Screens along with setup choices and explanations that you
will need for data entry. Because the TLS2P Setup Displays have only English labels, Screen Label codes have been
placed in brackets beneath every English label to let you quickly find a translation of the label and the page number(s)
of the Screen in which the label is used. Tank Setup Screens are covered in a separate section.
Entering data, confirming selections, etc. is done through one of several Data Entry Screens which display when you
touch any button to the right of a data entry window. These screens are described where they are first discussed in
this section.
System Status (Home) Screen
Legend for numbered boxes
1
2
3
4
5
6
7
8
9
10
11
01-01-2000
12:00 AM
ALL FUNCTIONS NORMAL
12
1
Date/time window - displays current date and time
2
Message window - displays All Functions Normal or
active alarms.
3
Alarm button - touch to acknowledge alarm and silence
alarm beeper. Note: touching this button does not clear
the alarm - the problem that caused the alarm must be
repaired.
4
Print button - For menu screens, touch this button and
all items available through the menu are printed to a
connected printer. For non-menu screens only, a print
dialog box appears when the print button is touched.
The user also has the option to cancel the print.
5
Main Menu button - touch to display the Main Menu
Screen (page 6) for access to system/tank setup and
manual tank testing.
6
Environmental Report button - touch to display tank
leak test results (page 63).
7
Alarm Report button - touch to display the Active Alarm
Status (and History) Screen (page 69).
8
Delivery Report button - touch to display the Delivery
Report Screen (page 63).
9
Inventory Report button - touch to display the Inventory
Report Screen (page 65).
10
Tank buttons - touch any tank button to display the
current inventory report for that tank.
11
Screen title window.
12
Manual Shift Close button - touch to manually close the
shift (page 61). (visible only if Snapshot is selected in
Shift Time (System Setup as the Shift Close Method) .