Introduction
Safety Symbols
4
Installation Components
• Groundwater sensor P/N 794380-62X
• Installation Kit - P/N 330020-280 (Figure 1)
• Manual 576013-763
Figure 1. Installation Kit
GLOVES
Wear gloves to protect hands from irritation or
injury.
USE SAFETY BARRICADES
Unauthorized people or vehicles in the work area are
dangerous. Always use safety cones or barricades,
safety tape, and your vehicle to block the work area.
WEAR EYE PROTECTION
Fuel spray from residual pressure in the lines
can cause serious eye injuries. Always wear
eye protection.
INJURY
Careless or improper handling of materials can result
in bodily injury.
READ ALL RELATED MANUALS
Knowledge of all related procedures before
you begin work is important. Read and under-
stand all manuals thoroughly. If you do not
understand a procedure, ask someone who
does.
Wire nut (3)
Tie wrap (1)
Epoxy sealant (1)
P/N 33102
8
-001
P/N 514100-304
P/N 57600
8
-461
P/N 510901-337
Cord Grip Fitting (1)
sensors\gwskit.eps
Fitting Body
(screw
into J-Box)
Cord Grip Nut
Note: watch orientation
of bevels and tapers
when assembling these
cord grip components.
Bushing
(fits into
tapered
end of fitting)
