Page
37
4
5
9
2
Feed the paper tail (9) over the
paper guide (4) and down
behind the paper feed roller (5).
2
9
10
6
If using the Take-up Spool (2)
place the paper tail (9) between
the two halves and press them
firmly together until you hear a
click.
Push the Take-up Spool (2) into
the upper slots. Rotate the spool
counterclockwise until you
remove all slack in the paper. (If
the Take-up Spool is not going to
be used, thread the paper tail
through the slot (10) in the printer
cover.)
Push the paper release lever (6)
up and close the cover.