Introduction
Safety Symbols
3
If the EMR
3
Display Head will be installed in an application other than replacing a V-R Mechanical Meter Register,
you must also have the Veeder-Root approved installation kit for that meter.
The non-temperature compensation kits below (200 series), include the necessary meter connec-
tion parts, a printer cable, and 35 feet of communications cable for a typical truck application. The
temperature compensation kits below (300 series), include a temperature probe kit in addition to
the necessary meter connection parts, a printer cable, and 35 feet of communications cable for a
typical truck application.
• Kit - installation for Tokheim, Daniels, Energy Flow Systems (Donovan) - Non Temp Comp (P/N 846000-204)
• Kit - installation for Tokheim, Daniels, Energy Flow Systems (Donovan) - Temp Comp (P/N 846000-304)
• Kit - installation for Smith - Non Temp Comp (P/N 846000-205)
• Kit - installation for Smith - Temp Comp (P/N 846000-305)
• Kit - installation for Liquid Controls, SAMPI, Total Controls Systems - Non Temp Comp (P/N 846000-206)
• Kit - installation for Liquid Controls, SAMPI, Total Controls Systems - Temp Comp (P/N 846000-306)
• Kit - installation for Neptune with existing mechanical Temp Comp - Non Temp Comp (P/N 846000-208)
• Kit - installation for Neptune with existing mechanical Temp Comp - Temp Comp (P/N 846000-308)
• Kit - installation for Neptune with no existing mechanical Temp Comp - Non Temp Comp (P/N 846000-209)
• Kit - installation for Neptune with no existing mechanical Temp Comp - Temp Comp (P/N 846000-309)
• Kit - installation for Brodie Brooks - Non Temp Comp (P/N 846000-208)
• Kit - installation for Brodie Brooks - Temp Comp (P/N 846000-308)
Safety Symbols
The following safety symbols may be used throughout this manual to alert you to important safety hazards and
precautions
EXPLOSIVE
Fuels and their vapors are extremely explo-
sive if ignited.
FLAMMABLE
Fuels and their vapors are extremely
flammable.
TURN POWER OFF
Live power to a device creates a potential
shock hazard. Turn Off power to the device
and associated accessories when servicing
the unit.
WARNING
Heed the adjacent instructions to avoid
equipment damage or personal injury.
INJURY
Careless or improper handling of materials
can result in bodily injury.
GLOVES
Wear gloves to protect hands from irri-
tation or injury.
WEAR EYE PROTECTION
Fuel spray from residual pressure in the lines
can cause serious eye injuries. Epoxy seal-
ant can cause eye injury. Always wear eye
protection when working with pressurized
lines and epoxy mixtures.
READ ALL RELATED MANUALS
Knowledge of all related procedures
before you begin work is important.
Read and understand all manuals thor-
oughly. If you do not understand a pro-
cedure, ask someone who does.
OFF
