4
1675 N. Delany Road
Gurnee, IL 60031–1282
Phone: 847.662.2666
Fax: 847.662.6633
Danaher Controls
G E N E R A L
Printed in U.S.A.
#702085-0001
February 13, 1997
Revision none
SPECIFICATIONS
Count /Time Input:
Count Input: NPN or PNP Signal field selectable
Count Speed: 30 Hz or 7.5 kHz max
Logic: Low < 0.7 VDC, High > 5 VDC
Minimum Pulse Width: 70
µ
second
Maximum Input: 30 VDC
Quadrature Input (C342-8562 only):
Type: Line driver or square wave pulse (A leading B for up
counting)
Count Speed: 2 kHz
Physical:
Dimensions: 24mm x 48mm, 32mm deep
Mounting: Panel Mount (mounting bracket supplied)
22mm (+ 0.3mm) x 45mm (+ 0.6mm) panel cutout
Maximum Panel Thickness: 26mm
Connections: 6 screw terminals
Weight: Approximately 2.25 ounces
Front Panel Rating: IEC IP65
Reset Input:
Type: NPN Signal, Contact Closure
Minimum Pulse Width: 15 ms
Gate Input:
Type: NPN Signal, Contact Closure
Output: (C342-0562, C342-1562, C342-2562):
Type: PNP transistor
Voltage/Curent: Supply less 2 Volt drop, 10 mA max
Operation:
Power Supply: 12 - 24 VDC (+20%/-10%)
Power Consumption: <150 mA
Display Type: 6 digit LED
Display Height: 7.6 mm
Data Retention: Non volatile RAM > 10 years
Factory Programmable Settings: Setpoint, Prescale Value,
Decimal Position, Text Message
Operating Temperature: -10
°
C to 50
°
C
Storage Temperature: -20
°
C to 60
°
C
Approvals: CE Mark
ORDERING INFORMATION
Part #
Description
C342-0562
Count Totalizer
C342-0562-A
As above with factory programmed value*
C342-1562
Timer (H:M:S)
C342-1562-A
As above with factory programmed value*
C342-3464
Tachometer
Part #
Description
C342-2562
Timer (Hundreths of Hours)
C342-2562-A
As above with factory programmed value*
C342-3562
Tachometer
C342-4562
Message Display
C342-8562
Position Indicator
* Possible Factory Programmable Settings: Setpoint, Prescale
Value, Decimal Position, Text Message. Specifcy the setting
and value when placing an order. (Ex: Setpoint = 4567)
Standard products manufactured by the Company are warranted
to be free from defects in workmanship and material for a period
of one year from the date of shipment, and products which are
defective in workmanship or material will be repaired or replaced,
at the option of the Company, at no charge to the Buyer. Final
determination as to whether a product is actually defective rests
with the Company. The obligation of the Company hereunder
shall be limited solely to repair and replacement of products that
fall within the foregoing limitations, and shall be conditioned
upon receipt by the Company of written notice of any alleged
defects or deficiency promptly after discovery within the warranty
period, and in the case of components or units purchased by the
Company, the obligation of the Company shall not exceed the
settlement that the Company is able to obtain from the supplier
thereof. No products shall be returned to the Company without its
prior consent. Products which the Company consents to have returned
shall be shipped F.O.B. the Company's factory. The Company cannot
assume responsibility or accept invoices for unauthorized repairs to its
components, even though defective. The life of the products of the
Company depends, to a large extent, upon the type of usage thereof,
and THE COMPANY MAKES NO WARRANTY AS TO FITNESS OF ITS
PRODUCTS FOR SPECIFIC APPLICATIONS BY THE BUYER NOR AS
TO PERIOD OF SERVICE UNLESS THE COMPANY SPECIFICALLY
AGREES OTHERWISE IN WRITING AFTER THE PROPOSED USAGE
HAS BEEN MADE KNOWN TO IT.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR OF
FITNESS FOR A PARTICULAR PURPOSE.
WARRANTY