VECTOR ™- USMC VECTOR 21-V.0.3
6
Getting started
Changing the battery
Open the battery compartment
using a suitable tool, or a coin.
Insert a 6V lithium battery, type
2CR5 or equivalent.
Ensure that the drawing ribbon
lies above the securing tape of
the battery cover. Keep the
battery cover seals and the
instrument case clean.
Refit the battery cover and re-
tighten the screw.
The VECTOR monitors the
battery’s condition. If the display
shows 'Lo batt', this indicates
that the battery is used up. You
can still get readings, but the
battery needs to be replaced
soon.
i
The 'Lo batt' display may also
appear under cold conditions,
since low temperature reduces
the battery performance.
Remove the VECTOR
battery before a prolonged
period of non-use.
Use non-magnetic batteries
only!
Getting started
Shop for Vectronix products online at:
1.877.766.5412
www.
SCOUTBASECAMP
.com
