Your kit has 16 fixed-value resistors. We'll mount these now, starting with the smallest
value and moving to the largest. Before mounting each one, carefully bend both leads
close to the resistor body to form right-angles, as shown below:
.4"
[ ] Find a 22 ohm resistor (red-red-black). Install at R3 and solder.
[ ] Find a 270 ohm resistor (red-violet-brown). Install at R4 and solder.
[ ] Find a 470 ohm resistor (yellow-violet-brown). Install at R2 and solder.
Locate two 2.2-K resistors (red-red-red).
[ ] Install 2.2 K at R11 and solder.
[ ] Install 2.2K at R14 and solder.
[ ] Find a 2.7-K resistor (red-violet-red). Install at R7 and solder.
[ ] Find a 4.7-K resistor (yellow-violet-red). Install at R17 and solder.
[ ] Find a 6.8-K resistor (blue-gray-red). Install at R5 and solder.
[ ] Find a 10-K resistor (brown-black-orange). Install at R18 and solder.
Locate two (2) 39-K resistors (orange-white-orange).
[ ] Install 39 K at R12 and solder.
[ ] Install 39 K at R15 and solder.
[ ] Find a 47-K resistor (yellow-violet-orange). Install at R8 and solder.
Locate four (4) 100-K resistors (brown-black-yellow).
[ ] Install 100 K at R1 and solder.
[ ] Install 100 K at R9 and solder.
[ ] Install 100 K at R13 and solder.
[ ] Install 100 K at R19 and solder.
This completes installation of the 16 fixed-value resistors (three variable resistors will be
installed later). Next, we'll install the kit's 15 disc-ceramic capacitors. All capacitors
should be seated as close to the board as possible.
[ ] Find a 2.7 pF disc-ceramic capacitor (2.2). Install at C3 and solder.
