(1 Front Cover)
(2 Warranty)
(3 Introduction)
VEC-1016K 49-MHz Wireless-Band Monitor Receiver:
The 49-MHz consumer-wireless band is teaming with signals from baby monitors,
cordless phones, walkie-talkies, remote control boxes, wireless intercoms, and much
more. If you ever wanted to explore this especially-active portion of the radio spectrum,
this kit's for you. The VEC-1016K makes a great add-on baby monitor or test receiver,
and with the addition of an outdoor antenna, it pulls in weak wireless signals for miles
around--just like the best commercial scanner and monitor receivers! Building the VEC-
1016K provides excellent hands-on electronics experience. Detailed step-by-step
assembly instructions guide you through each stage of construction, and clearly-presented
alignment procedures ensure top performance without need for expensive test equipment.
Convenient electronic tuning covers just the 49-MHz band, with no need to enter long
strings of microprocessor commands to get the coverage you want. Once tuned to an
active channel, your radio's "tail-free" squelch mutes background noise between
transmissions. The VEC-1016K consumes minimal energy runs for many hours from its
self-contained 9-volt flat-pack alkaline battery. Plug in a 8-ohm speaker or use
headphones for loud-and-clear reception. All circuitry is self-contained on a rugged 3" x
3.2" pc board.
(4) Tools and Supplies:
Construction Area:
Kit construction requires a clean, smooth, and well-lighted area
where you can easily organize and handle small parts without losing them. An
inexpensive sheet of white poster board makes an excellent construction surface, while
providing protection for the underlying table or desk. Well-diffused overhead lighting is
a plus, and a supplemental high-intensity desk lamp will prove especially helpful for
close-up work. Safety is an important consideration. Be sure to use a suitable high-
temperature stand for your soldering iron, and keep the work area free of combustible
clutter.
Universal Kit-building Tools:
Although your particular kit may require additional items
to complete, virtually all construction projects require a work area outfitted with the
following tools and supplies:
