5
3.2 HIGH EFFICIENCY AREA LIGHT OPERATION
• Make sure ON/OFF (2-position) switch is in OFF position.
• Remove the 12 volt DC power accessory cord and plug it into
any 12 volt
DC vehicle accessory outlet.
• Switch small switch located on area light to ON position.
• Place base on firm steady surface or hold rubberized handle
while using
area light.
• When finished with area light usage, place switch in OFF
position.
• Unplug 12 volt DC accessory power cord from 12 volt DC
power port.
• Restore power cord into its compartment.
3.3 RED HAZARD EMERGENCY LIGHT OPERATION
• Make sure ON/OFF (3-position) switch is in OFF position,
center.
• Remove the 12 volt DC accessory power cord and plug it into
any 12 volt
DC
vehicle accessory outlet.
• Switch ON by pushing switch toward the back of the unit
where the
emergency red LED hazard light is
located.
• Place base on firm steady surface or hold rubberized handle
while using
red
hazard emergency light.
• When finished with red hazard emergency light usage, place
switch in OFF
position, center.
• Unplug 12 volt DC accessory
power cord from 12 volt DC vehicle
accessory outlet.
• Restore power cord into its
compartment.
4. VEC271MG DIAGRAM
1. Powerful replaceable halogen spotlight
2. ON/OFF power switch for area light
3. ON/OFF/hazard (3-way) switch
for the
spotlight
