background image

3

Two recharge adapters are supplied with the spotlight. It is rechargeable from

either a 12 volt DC accessory outlet, or from any 120 volt 60 Hz AC outlet. This

permits recharge flexibility for use around home, business or in the field.  12

volt DC power is available from most vehicles, boats, jump starters and portable

battery packs. Vector has a variety of portable power products that would make

ideal companions.

2. FEATURES

• High-intensity, ultra-white, 100-watt halogen bulb

• Corded/cordless, powerful Quartz Halogen Spotlight for use whenever and

wherever you need light

• provides  up to 20 minutes of continuous light (when fully charged)

• Includes biuilt-in area light located in grip

• Corded - plug into any 12 volt DC accessory outlet for extended use and charging

• Built-in utility work stand for garage, work bench and roadside repairs

• Take anywhere - use cordless or plug into 12 volt DC outlet

• Replace 12 volt, 3 amp, sealed, non spillable battery 

• Powerful, prefocused, replaceable quartz halogen bulb in spotlight

• Recharge from home or vehicle (AC and DC adapters included)

3. LOCATION DIAGRAM

4. OPERATION

A two-position switch (spotlight on/off) controls the operation of the main beam. The

area light is controlled by a two-position button (area light on/off) is located on the side

of the unit. The spotlight can be continuously lit for up to 20 minutes on a full battery

charge. The area light can be lit for up to 12 hours on a full battery charge. 
Figure 1 shows locations of the handle, the handle lock button, spotlight ON/OFF

switch, area ON/OFF switch, and the recharging port with LED charging indicator.

5. RECHARGING

AC and DC recharge requires use of these sup-

plied recharge adapters. Do not charge spotlight

using any other adapters (see Figures 2 and 3).

TRIGGER LOCK

SWITCH

LED CHARGING

INDICATOR

FOUR POSITION

HANDLE

AREA LIGHT ON/OFF BUTTON

BEAM ON/OFF TRIGGER

FIGURE 1

AREA LIGHT

RECHARGE PORT

DC CHARGING PORT

Summary of Contents for VEC184POB








Reviews: