background image

 

TCY-FT-U 

Configuration 

 

Doc: 70-00-0128B, V1.2, 20110621 

© Vector Controls GmbH, Switzerland 

Page 7 

Subject to alteration 

Output configuration 

Parameter Description 

Range 

Default 

CP 12 

Manual Override Mode:  
Allows manual control of the floating outputs for using the 

controller as positioner or during commissioning.  

ON, OFF 

OFF 

CP 13 

Running time FO1 (TCY-FT4-U = heating output) 
The total time it takes for the actuator to run from fully open 
to fully closed or from fully closed to fully open 

0-255s 90s 

CP 14 

Minimum running time FO1 (TCY-FT4-U = heating output) 
The minimum time the output runs once it starts. This setting 

prevents frequent switches with very short running times.  

0-255s 3s 

CP 15 

Running time FO2 (TCY-FT4-U = cooling output) 
The total time it takes for the actuator to run from fully open 

to fully closed or from fully closed to fully open 

0-255s 90s 

CP 16 

Minimum running time FO2 (TCY-FT4-U = cooling output) 
The minimum time the output runs once it starts. This setting 

prevents frequent switches with very short running times. 

0-255s 3s 

CP 17 

Maximum Output in Economy (unoccupied) Mode  
Reduces the load on the system when is the space is 
unoccupied.  

0 – 100 % 

50% 

 

 

Summary of Contents for TCY-FT2-U-W01









Reviews: