CORDLESS OPERATION
1. Before cordless use, charge battery fully with 110 volt AC battery charger
adapter (included) (see instructions on page 4).
2. Move
“Slide switch”
on back of spotlight head to
full left position
to light
area light.
3. Move
“Slide switch”
to
center position
and
pull trigger switch
to light
one beam.
4. Move
“Slide switch”
to
full right position
and
pull trigger switch
to light
both beams.
CORDED OPERATION/DC RECHARGING FROM VEHICLE:
NOTE: During corded operation, the batteries will charge while the spotlight or
area light is being used.
* A full charge takes up to 2 to 3 hours using DC method with vehicle running.
1. Insert 12 volt DC power plug into DC power outlet on the unit.
2. Plug the other end into any vehicle’s accessory receptacle or other
compatible 12 volt DC power source that can supply at least 15 amps.
2
110V AC
C
HARGER
A
DAPTER
12V
C
HARGER
P
OWER
C
ORD
12V DC
POWER OUTLET
AND DC RECHARGING
PORT
110V AC
RECHARGING
PORT
