6
Maintaining the valve petal
Unscrew the fuel filter before removing the top of the carburettor. Check the valve for any distortions or cracks. If
it’s damaged, you will need to replace this part.
TIP: It’s important to assemble the parts of the carburettor in the
order there where disassembled. The distance between the petal valve and the valve plate o should be approximately
1 mm.
COMMON TROUBLESHOOTING
If there is no ignition:
• Listen for any noises coming from the engine
If there is noise coming from the engine but there is no ignition, this could be because the engine has flooded (an
over-supply of fuel in the carburettor). Press the choke/off button above the fuel tank and then press the start
button until you hear the machine ignite. Repeat this procedure several times if it doesn’t start the first time.
STEP 1
STEP 2