![background image](http://html1.mh-extra.com/html/vectaire/heatrec1003/heatrec1003_installation-operating-and-maintenance-instructions_3739216005.webp)
Page 5
Optional Wall Mounting positions:
Please note the various positions available for fan mounting. If the pull-cord is used, it will be necessary to adjust the position
of the switch and/or cord to allow a downward pulling action.
For orientation 270º, the switch has to be relocated to the position shown and the cable re-routed. The switch must be
pressed firmly into its location in the backplate moulding so that there is no movement when the cord is pulled.
n.B to provide the correct switching action, the switch needs to be turned over so that the pulling action is from the
left of the switch
.
Orientation 0º - Factory Setting
Orientation 90º
Orientation 270º
Orientation 180º
Summary of Contents for Heatrec1003
