Box Contents
1. Heatrec 1003
2. Electric Cable - 1.2 m long
3. Wall tube with cowl
4. Wall Plugs
5. Screws
6. Wall Seal
7. External bezel
8. Template
9. Gasket
10.Instruction Leaflet
Installation
1. Check the wall thickness to ensure that the wall tube is of adequate length. The ventilation slots in the side of the cowl
must be beyond the wall surface.
2. Make sure the necessary tools are available.
3. Check that the box contains all of the above parts, together with a pull-cord which should be attached to the unit.
4. Choose the angle at which the unit will be installed and check there are no obstructions where the hole will be drilled.
1
2
4
5
6
8
9
10
Page 4
7
3
Summary of Contents for Heatrec1003
