Copyright © Vecow Co., Ltd. All Rights Reserved. SPC-2000 Series Ultra-compact Embedded System User
Manual
60
APPENDIX A: ISOLATED DIO GUIDE
Appendix C:
WIN7 INSTALLATION GUIDE
Vecow’s ultra-compact box PC, SPC-2000 series, offers the best possible hardware specification
in the market. It supports four USB 3.0 ports. Although USB 3.0 is compatible to USB 2.0, it
requires USB 3.0 driver for activation. Windows 8 has built-in USB 3.0 driver, and the user can
smoothly install OS. In Windows 7, however, USB 3.0 driver is not included and requires extra
steps. This document provides options and steps for user to install Operation System and
activate USB 3.0 ports in Windows 7 environments. This installation process focuses on
Windows 7, WinServer2008 R2 of Windows System and Fedora 21, and Ubuntu 12.04 LTS Linux
distribution.
Win7 Pre-installed by Vecow
Vecow has Customer License Agreement with Microsoft and can help to purchase and pre-install
OS for all Vecow products. Along with system burn-in test, USB 3.0 driver will be installed and
checked before shipping. You are welcome to include storage device and Operation System
when ordering products. Please contact Vecow sales team for more details.
Win7 OS installation via DVD
1.
Connect a
USB hub
to the following port and connect input devices
2.
Change the following BIOS settings
Advanced ->
CSM Configuration
-> Storage -> Legacy Only
Advanced ->
USB Configuration
-> Legacy USB Support -> Enabled
Advanced ->
USB Configuration
-> XHCI Hand-off -> Disabled
Advanced ->
USB Configuration
-> EHCI Hand-off -> Enabled
Chipset -> South Bridge -> USB Configuration -> XHCI Mode -> Disabled
Chipset -> South Bridge ->
USB Configuration
-> USB 2.0(EHCI) Support -> Enabled
Save & Exit -> Save Changes and Exit -> Yes
3.
Connect all USB devices (DVD/Keyboard/Mouse) to the PCH USB port.
Before OS/USB3 drivers are properly installed, only PCH USB port can be recognized by
Legacy OS kernel. It is suggested to use a USB hub for the PCH USB port and connect all USB
devices to the hub.