Copyright © Vecow Co., Ltd. All Rights Reserved. SPC-2000 Series Ultra-compact Embedded System User
Manual
46
BIOS AND DRIVER
CHAPTER4
BIOS AND DRIVER
4.1
BIOS Settings
The board uses UEFI BIOS that is use Serial Peripheral Interface (SPI) Flash. The SPI Flash
contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN, EEPROM
information, and Serial port support. The BIOS setup program is accessed by pressing the
<Del> key after the Power-On Self-Test (POST) memory test begins and before the
operating system boot begins. The menu bar is shown below.
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Main
Advanced
Chipset
Security Boot
Save & Exit
Figure 1-1: BIOS Menu Bar
4.2
Main Menu
Aptio Setup Utility – Copyright (C) 2013 American Megatrends, Inc.
Main
Advanced
Chipset
Security Boot
Save & Exit
BIOS Information
Item Specific Help
BIOS Version
Vecow SPC-2000 020-005
Release time
10/01/2014 16:40:00
4.2.1
System Language
[English]
System Date
[Thu 02/21/2013]
System Time
[
12
:00:00]
Figure 1-2: BIOS Main screen
System Time / Date :
Press “TAB” key to switch sub-items of value .Then press “ +” key or “-“ key number
key for modify value.
In this page , you could make sure you CPU type and DRAM type that you are install into this system.
