34
©Vecow ECX-2600/2400/2300 PEG User Manual
GETTING TO KNOW YOUR ECX-2600/2400/2300 PEG
2.3.5 PoE Ports
2.3.5.1 ECX-2600/2400 PEG
There are 4 RJ45 connectors in the rear side of ECX-2600/2400 PEG. It supports IEEE
802.3at (PoE
+
) Power over Ethernet (PoE) connection delivering up to 37W/54V per
port and 1000BASE-T gigabit data signals over standard Ethernet Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel
®
I350 Gigabit Ethernet controller and
independent PCI express interface to connect with multi-core processor for
network and data transmit optimization. Only when PoE port starts to supply
power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 3 and LAN 6 are listed as follows :
Pin No.
10/100 Mbps
1000Mbps
PoE
1
E_TX+
MDI0_P
PoE+
2
E_TX-
MDI0_N
PoE+
3
E_RX+
MDI1_P
PoE-
4
------
MDI2_P
------
5
------
MDI2_N
------
6
E_RX-
MDI1_N
PoE-
7
------
MDI3_P
------
8
------
MDI3_N
------
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000 Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
LED Location LED Color
10Mbps
100Mbps 1000Mbps
Right
Green/
Orange
Off
Solid
Green
Solid
Orange
Left
Yellow
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
POE LED
LED Color
POE Status
LED 1 - 4
Solid Green
POE ON
1
8