105
©Vecow ECX-2600/2400/2300 PEG User Manual
BIOS SETUP
4.4.2.2 SATA and RST Configuration
SATA Controller(s)
Enable or disable SATA Device.
SATA Mode Selection
Determines how SATA controller(s) operate.
Software Feature Mask Configuration
RAID OROM/RST driver will refer to the SWFM configuration to enable or
disable the storage features.
Aggressive LPM Support
Enable PCH to aggressively enter link power state.
Options for each SATA port
Port n
Enable or disable SATA Port.
Hot Plug
Designated this port as Hot Pluggable.
Spin Up Device
On an edge detect from 0 to 1, the PCH starts a COMRESET initialization
sequence to the device.
SATA Device Type
Identifies that the SATA port is connected to solid state drive or hard disk drive.
Figure 4-4-2-2 : SATA and RST Settings