24
©Vecow ECX-1200/1100 User Manual
GETTING TO KNOW YOUR ECX-1200/1100
2.2 Front Panel I/O Functions
In Vecow ECX-1200/1200M/1100 series family, all I/O connectors are located on
front panel and rear panel. Most of the general connections to computer device,
such as USB, LAN Jack, Display, VGA, DVI-D, Display Port and any additional
storage, are placed on the front panel.
2.2.1 Reset Tact Switch
It is a hardware reset switch. Use this switch to reset the system without power off
the system. Press the Reset Switch for a few seconds, then reset will be enabled.
RST
DP
LAN 1
/
LAN 2
DVI-D
VGA
ANT 4
ANT 3
CFast
SIM 2
SIM 3
SIM 1
1
2
3
WLAN
10
10
2.2.2 Power Button
The Power Button is a non-latched switch with dual color LED indication. It indicates
power status : S0, S3 and S5. More detail LED indications are listed as follows :
LED Color
Power Status
System Status
Solid Blue
S0
System working
Solid Orange
S3, S5
Suspend to RAM, System off with standby power
To power on the system, press the power button and then the blue LED is
lightened. To power off the system, you can either command shutdown by OS
operation, or just simply press the power button. If system error, you can just
press the power button for 4 seconds to shut down the machine directly.
Please do note that a 4-second interval between each 2 power-on/power-off
operation is necessary in normal working status. (For example, once turning
off the system, you have to wait for 4 seconds to initiate another power-on
operation).
RST
DP
LAN 1
/
LAN 2
DVI-D
VGA
ANT 4
ANT 3
CFast
SIM 2
SIM 3
SIM 1
1
2
3
WLAN
10
10
