94
©Vecow ARS-2000 User Manual
Appendix B
BOOL GetPOEConfig(BYTE *Auto, BYTE *Mask)
Get POE configuration (by variable)
Auto ([1:0]): Auto mode, pin setting by hexadecimal bitmask
1: Auto;
0: Manual
Mask ([1:0]): DC Enable / Disable, pin setting by hexadecimal bitmask
1: Enable;
0: Disable
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware problem)
BOOL SetPOEConfig(BYTE Auto, BYTE Mask)
Set POE configuration
Auto ([1:0]): Auto mode, pin setting by hexadecimal bitmask
1: Auto;
0: Manual
Mask ([1:0]): DC Enable / Disable, pin setting by hexadecimal bitmask
1: Enable;
0: Disable
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or out of range error, or hardware problem)
BOOL GetPOE(BYTE *POE)
Get POE input
POE ([1:0]): POE state, pin setting by hexadecimal bitmask
1: On;
0: Off
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware problem)
BOOL SetPOE(BYTE POE)
Set POE output
POE ([1:0]): POE state, pin setting by hexadecimal bitmask
1: On;
0: Off
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or out of range error, or hardware problem)
Summary of Contents for ARS-2000
Page 2: ...ii Version Date Page Description Remark 1 0 12 08 2017 All Official Release Record of Revision...
Page 62: ...55 HARDWARE INSTALLATION Step 3 Remove three PH M3x6L screws Step 4 Finish...
Page 70: ...63 HARDWARE INSTALLATION Step 3 Install PCIe PCI card to the socket Step 4 Fasten the M3 screw...
