93
Appendix B
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or hardware problem)
BOOL GetDIO1(WORD *DI)
BOOL GetDIO2(WORD *DI)
Get non-isolated DIO input (DIO input)
DI ([15:0]): Input state, pin setting by hexadecimal bitmask
1: High;
0: Low
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware problem)
BOOL SetDIO1(WORD DO)
BOOL SetDIO2(WORD DO)
Get non-isolated DIO input (DIO input)
DI ([15:0]): Input state, pin setting by hexadecimal bitmask
1: High;
0: Low
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or hardware problem)
BOOL GetWDT(DWORD *WDT)
Set non-isolated DIO output (DIO output)
DO ([15:0]): output state, pin setting by hexadecimal bitmask
1: High;
0: Low
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or hardware problem)
BOOL SetWDT(DWORD WDT)
Set watchdog timer setup
WDT: watchdog timer setup
Unit: second. (Range: 1 ~ 65535 sec, 1093 ~ 65535 min
(=65580 ~ 3932100 sec))
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or setup 0 error, or hardware problem)
BOOL CancelWDT()
Cancel watchdog timer
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or hardware problem)
Summary of Contents for ARS-2000
Page 2: ...ii Version Date Page Description Remark 1 0 12 08 2017 All Official Release Record of Revision...
Page 62: ...55 HARDWARE INSTALLATION Step 3 Remove three PH M3x6L screws Step 4 Finish...
Page 70: ...63 HARDWARE INSTALLATION Step 3 Install PCIe PCI card to the socket Step 4 Fasten the M3 screw...
