5 - FAN MODES
5.1 Fan Auto Mode
The Vega MK II has got four possible fan speeds: minimum, medium, maximum and
extra-maximum. When you select this mode, on the panel, both the Auto and the
speed probes, set out from the panel, blink.
The more the ambient temperature is different from the set value, the higher is the fan
speed.
How to set up the mode
When the panel is on
Press the Arrow Down button > [Fan] > Press the S button > Press the Arrow Up or
the Arrow Down button to select [A] > Press the s button
With the remote-control device
Press more times the Fan button to read [A] on the display.
There are four possible fan speeds: minimum, medium, maximum and extra-maxi-
mum.
How to set up the mode
When the panel is on
Press the Arrow Down button > [Fan] Press the S button > Press the Arrow up or the
Arrow Down button to select the desired speed [1] [2] [3] [4] > Press the S button
With the remote-control device
Press more times the Fan button to select the desired speed [1] [2] [3] [4].
5.3 Fan control parameters
Parameter CO1 (Default=All)
Maximum speed to be used in Fan Auto Mode.
How to set the parameter CO1
When the panel is off
Press the S button > [CO1] > Press the S button > Press the Arrow Up or the Arrow
Down button to select the desired value [All] [no4] o [no3] > Press the S button
Parameter CO2 (Default=All)
Minimum speed to be used in Fan Auto Mode.
How to set the parameter CO2
When the panel is off
Press the S button (for 3 seconds) > [CO1] > Press the Arrow Down button to select
[CO2] > Press the S button > Press the Arrow Up or the arrow Down button to select
the desired value [All] o [no1] > Press the S button
Pag.
9
5.2 Fan Manual Mode
