If you must work without disconnecting the power supply, insulated tools
should be used.
The electrical outputs of the anemometer system indicating instrument
and the cables connected to them must be protected against direct
contact or damage. This means that the cables must have a sufficient
insulation resistance or voltage rating, and that touching the contact
points is prevented.
Adequate measures are taken to ensure that electrically conducting
parts of the connected consumers are protected against direct contact.
The use of non-insulated wires and contacts is strictly forbidden.
Safety Instructions for maintenance
Anemometer system components can only be repaired by specialists
authorized by VDO Kienzle. The VDO LOGIC anemometer system
fulfills the applicable safety regulations.
Note: Capacitors in the unit can retain their charge, even if the unit is
separated from its power supply.
Check that replacement fuses are of the indicated type and current
rating. The use of temporarily repaired fuses or jumpering the fuse
holder is strictly forbidden.
26
SAFETY INSTRUCTIONS
olwind_e.qxd 21.06.99 13:35 Seite 26
