Traffic information
Use the “Traffic info” option in the main control to
obtain information about traffic conditions in three
different categories:
–
At the car position
–
At the destination
–
On the route
✎
Please note that the RDS-TMC station picked up by the TMC receiver may not
provide any traffic information relating to your destination if the destination is
located outside the station range.
✎
C-IQ Traffic info contents must be activated to ensure this function.
■
At position
All traffic obstructions in the vicinity of the current position of your car transmitted by
the RDS-TMC station are displayed here.
■
At destination
All traffic obstructions in the vicinity of the selected destination transmitted by the
RDS-TMC station are displayed here.
■
On the route
All traffic obstructions on the route are displayed.
✎
If no traffic information is received or there are no traffic obstructions on the route,
the corresponding menu items will be greyed out.
Viewing details relating to traffic information
☞
Select the required traffic report from one of the three lists (“At position”, “At
destination”, “On the route”) in order to view details relating to traffic
information.
:
The first details screen appears:
The following information is available:
–
Road affected
–
Distance to the start of the segment in which the
traffic obstruction is located;
–
Length of the section in which the traffic
obstruction is located;
–
Type of obstruction (e.g. road works, stationary
traffic, closed road).
As soon as you enter the segment affected by the traffic obstruction, the distance-to-go
information will disappear.
* only with TMC extension connected
TRAFFIC INFORMATION*
41
On the route
Roadworks
A6
R
60 km
8.6 km
Traffic info
At position
At destination
On the route
