FMTerminal
English
14
number of characters allocated to it.
By pressing the same key more than
once, the other characters can be
accessed. If a number field such as
“Customer code” is selected, the keypad
keys will always start their key cycle
with the associated key digit. If a
alphanumeric field such as
“Description” is chosen the keypad key
cycle will begin with the first
associated key character.
3.
Switching the FMTerminal on and off
The FMTerminal will switch on
automatically when the following events
occur:
- Any key is pressed
- A driver is identified by means of a
driver key
- Vehicle ignition is switched on.
- If the FM200 is in Drive mode (rpm
and/or speed is present)
The FMTerminal will switch off
automatically on completion of a trip
once the FM200 on-board-computer enters
its armed state (the FM200 indicator
LED starts to flash) and ignition is
off. This will happen only if there has
been no keyboard activity for the last
60 seconds, in which case the
FMTerminal will delay switching off
until the user has completed his
operation.
Summary of Contents for FM Series
Page 2: ......
Page 12: ...FMTerminal Deutsch 10 ...
Page 21: ...FMTerminal English 19 ...
Page 22: ......