DLKPro Inspection Key • Operating Instructions – Edition 03/2012
4 Performing a (roadside) inspection
Any suspicious events detected during the quick
check, e. g. exceeding of the programmed
maximum speed, are indicated by
• intermittent beeps and
• a red LED.
You can now download the mass memory based on
your configuration; see page 33.
Create a digital tachograph printout of the
Events
and Faults
,
Technical Data
and (if possible) the
Speed
data blocks.
Check the downloaded driver card and mass
memory data using the “DownloadTools”
PC programme; see page 28.
Note
: If, after the quick check, the DLKPro remains
plugged in for more than 10 seconds, the mass
memory download will start automatically – based on
the specified configuration.
Note
: Always check infringements found with the
printouts from the digital tachograph. If you are a
TIS-Web
®
or TIS-Office
®
user, you can use these
programmes to carry out further data evaluations.
