II
• E
01
/2
00
9
33
Entering a PIN for the workshop card
PIN via USER SELECTION
4.2
PIN via User selection
Up to 10 users can be created in the CTC II.
The workshop card PIN is protected for each user by a
personal 4-digit password. The password consists of
numerals.
4.2.1
Creating and deleting users
Be careful with the workshop card and its PIN. Misuse of the
workshop card and its PIN must not take place!
Do not pass on the personal password to third parties.
Change your personal password regularly to prevent
misuse.
◄
Important
1
Press
to select Input PIN.
2
Select the "<new>" menu and confirm.
3
Enter the user name (max. 15 characters) and confirm.
The workshop card PIN and the personal password will be
saved under this name.
Remark:
Saved entries cannot be edited. The complete name must
always be entered.
4
Enter the workshop PIN* and confirm.
*See the note on Page
.
Remark:
If you confirm the function without entering the workshop PIN,
the user who was entered is deleted (or not created) and the
User selection
menu is displayed.
5
Enter the personal password* and confirm.
The settings are saved and the
User selection
menu is
displayed.
*4-digit numerical value
6
End the program.