12
* Depending on version
MANUAL TUNING (if you know the frequency
of the required station)
• To switch to manual tuning :
• Tune to the desired frequency :
After about 1 minute with a beep the radio
automatically switches back to search tuning
MANUALLY STORING STATIONS IN A
PRESET
You can manually store 20 FM stations (on the
FM1 band), 10 MW stations (on the MW1 band)
and 10 LW stations.
• Select the desired waveband :
• Tune-in the desired station :
• To enter preset store mode :
• To select the preset number you wish to
use :
• To store the station on the selected preset
number:
When storing an FM station, the relevant RDS
information and AF mode (on/off) are also
stored on the preset.
AUTOMATICALLY STORING STATIONS
(AUTO-STORE)
By simply pressing one key you can automatically
store 10 strongest FM stations (on the FM2 band)
or 10 strongest MW stations (on the MW2 band).
When you use Auto Store, the new stations replace
any stations previously stored in the FM2 band
or the AM2 (MW2) band.
• Select an FM or MW waveband :
• Activate AST :
– The set gives a beep and then mutes.
– When it has finished, you hear a beep and the
station stored on preset 1.
– Sometimes it may not be possible to find 10
stations.
RECALLING A PRESET
• Select the desired waveband :
• Select the desired preset :
Useful tips
Cannot select desired preset station numerically
in FM1 band.
• Alphabetical station selection (A~Z) is activated.
You can only select preset station according to
alphabetical order.
– To deactivate alphabetical station selection :
FREQUENCY SCAN
This function allows you to listen to each located
station on the current waveband.
• Activate/deactivate SCAN :
- To adjust the scan time, see INITIAL
SETTINGS.
