background image

 

15

TROUBLE SHOOTING

 

Before going through the check list, check wiring connection.    If any of the problems 
persist after check list has been made, consult your nearest service dealer.

 

 

Symptom

 

Cause

 

Solution

 

The car ignition is not on.

 

 

If the power supply is properly 
connected to the car accessory 
terminal, switch the ignition key 
to “ACC”.   

No power.

 

 

The fuse is blown.   

Replace the fuse.   

Presence of CD disc 
inside the player. 

Remove the disc in the player, 
then put in a new one. 

Inserting the disc in 
reverse direction.   

Insert the compact disc with the 
label facing upward. 

Compact disc is extremely

 

dirty or defective disc.   

Clean the disc or try to play a 
new one.

 

Temperature inside the car 
is too high. 

Cool off or until the ambient 
temperature return to normal.

 

Disc cannot be 
loaded or Ejected.

 

 

Condensation.   

Leave the player off for an hour 
or so, then try again.   

Volume is in minimum.   

Adjust volume to a desired 
level. 

No sound.

 

 

Wiring is not properly 
connected.  

Check wiring connection. 

The installation angle is 
more than 30 degrees.   

Adjust the installation angle to 
less than 30 degrees. 

Sound skips.   

The disc is extremely dirty 
or defective disc.   

Clean the compact disc.     
Then try to play a new one. 

The operation keys 
do not work.   

The built-in microcomputer 
is not operating properly 
due to noise.

 

 

 

Press the RESET button. 
Front panel is not properly fixed 
into its place. 
Contacts between front and 
main unit are dirty.    Clean 
contacts with a cotton bud 
soaked in isopropyl alcohol.   

The radio 
does not work.   

The antenna cable is not   
connected.  

Insert the antenna cable firmly. 

The radio station 
automatic selection 
does not work.   

The signals are too weak.

 

 

Select a station manually.

 

 

English 

Summary of Contents for CD 1404 MP3 -















Reviews: