8
GENERAL OPERATION
ON / OFF
Switch on the unit by pressing button (3)
when system is on, press POWER
button (3) to turn off the unit.
FACEPLATE
RELEASE
Press REL button (1) To flip down panel and
take out the panel follow as figure 1.0.
SOUND
ADJUSTMENT
Press SOUND button (22) to select the
desired adjustment mode. The adjustment
mode will change in the following order:
By turning AUDIO ADJUST button (2),
different setting levels can be adjusted.
Note:
Bass/Treble selections are only
active when the DSP (Digital Sound
Processor) is switched off.
Item
Range of adjustment
DSP
OFF FLAT CLASSIC
POP
ROCK
Volume
0 100
Bass
-10 0 +
10
Treble
-10 0 +
10
Balance
-10 0 +
10
Fader
-10 0 +
10
Bass Boost
OFF
BB 1
BB 2
BB 3
Press
SOUND button (22)
for 2 seconds,
it will trigger a series of advanced RDS
settings.
Refer to RDS (radio data system)
operation section for details.
A/. DSP mode
Press SOUND button (22) to turn on sound
DSP function (Digital Sound Processor)
and to select desired audio mode.
There are five kinds of mode as below:
Activating the DSP overrides the prior
selected Bass/Treble settings.
B/. Bass Boost mode
Activate Bass Boost mode by
SOUND
button (22)
and select desired
Bass
Boost
effect as rotate
Volume button (2)
.
There are four kinds of mode as below:
FLASHING
LED
If the front panel is removed from the unit,
the LED (24) will be flashing.
RESET
RESET button (25) is placed on the front
panel and must be activated with either a
ball point pen or thin hard object.
The RESET button (25) is to be activated for
the following reasons:
- All the function buttons do not operate.
- Error symbol on the display.
Note:
Pressing the RESET button (25) will
erase your stored stations in the memory.
SOURCE
Press button (12) to switch between CD
and Radio.
MUTE
Press volume button (2) to silence the
receiver. Press it again to resume
listening.
OFF
BB1
BB2
BB3
Volume
DSP
Bass
Treble
Fader
Bass
Boost
Balance
CLASSIC
FLAT
POP
ROCK
DSP OFF
