Issue 02/2017
©
Continental Automotive
41
2.4.14.3 Footer of diagram tape
The Diagram tape footer and its information are according to Fig 2.5.2.1.1
below:
Figure 2.5.2.3.1
a.
Date and time of printing: it will be printed on the tape the exact time the
diagram tape was printed as well as the date.
b.
Print Number: It is the same information contained in the header which is
the amount of times which the diagram tape was printed.
c.
Maximum authorized speed: This speed is previously registered according
to the use category of vehicle, which may be to carry passengers, school
purposes or general cargo transportation. This speed is the maximum
category of the vehicle and therefore the driver must always respect the
maximum speed of the road.
d.
Last 24 hours: When exceeded the maximum authorized speed of the
vehicle, it will print the fastest speed achieved in the last 24 hours of
vehicle operation.
e.
Time / date adjustment: In case of time change, zone update or daylight
saving time, will print the date and time when there was such a change.
f.
Driving time function: In case of non-compliance with the time direction and
rest by the driver, BVDR will indicate in the diagram tape, which activity /
driver was not performed correctly.
g.
Signature: Upon inspection, the authority must sign the tape.
Denatran and Inmetro approval ordinance: Information of approval
ordinances (Standard).
e.
f.
g.
Figure 2.5.4.1
Summary of Contents for BVDR
Page 1: ...Digital BVDR Tachograph Operator s Instruction manual...
Page 54: ......
