Settings
Set connections
Basically, you have various options to adjust the settings of the R4 GPS according to your wishes. You can do this either directly on the device or with the SIGMA RIDE app.
Make settings on the device
This chapter describes the settings that you can set in the main menu. If you have already started the training, you only have a selection of setting options in
the quick menu. You will find the following options for setting the device in the main menu:
Shut Down:
Here you can switch off the device.
Navigation:
Here you can start a track.
Connection:
Here you can set up connections to a smartphone or an eBIKE
Total values:
Here you will find an overview of your total values, such as distance, altitude, etc.
Settings:
Here you will find all device settings
The functionality of the R4 GPS is congruent in all settings. Use the + button to select the menu item to be set, press START to confirm the selection.
Then you can make the setting with the + button and confirm again with START. You can close the menu at any time by holding down the START button.
Connection to the smartphone
To establish the connection to the smartphone, make sure that Bluetooth is switched on on your smartphone. You have to download the SIGMA RIDE app from the respective
app store (iOS or Android). If these two prerequisites are met, select the
menu item ”Connection › Smartphone”
. The R4 GPS automatically searches for the RIDE app.
For the rest of the process, please follow the instructions in the app.
The SIGMA RIDE app will guide you according to various authorizations, among others Ask for location approval.
Agree to these authorization requests in order to ensure optimal functionality of the SIGMA RIDE app.
If you have successfully connected the smartphone, you can see in the
menu item ”Smartphone”
which smartphone
was connected to the device and cancel the pairing to the smartphone. Please note that the R4 GPS can only communicate
with
ONE
smartphone.
E bike
To connect an e-bike to the R4 GPS, select the E-bike menu item in the connection settings. If no e-bike is currently paired with the R4 GPS, the R4 GPS immediately
searches for available e-bikes.
For pairing, the e-bike must be nearby (maximum appR4 GPS. 10 m away) and switched on. Please refer to the operating instructions for your e-bike to find out whether
further steps are required on the e-bike side to connect the e-bike to a display. Only
ONE
e-bike can be connected to the R4 GPS at a time.
If compatible e-bikes are found, a list of the e-bikes found is displayed after the search. Select the desired e-bike (+ button) and start pairing with the START button.
If the pairing is successful, you will be taken to the information view of the e-bike. You can also reach this when you select the “E-Bike” menu item in the connection
settings with the paired e-bike. Here you can see various information about the e-bike and can disconnect the connection between R4 GPS and e-bike again.
To do this, press the START button in the e-bike overview.
Summary of Contents for R4GPS
Page 1: ...DE HANDBUCH EN MANUAL...
