VDO Cyclecomputing M6 User Manual Download Page 8

Page: 8 / 87

Functions

The VDO M6 has the following functions:

Current speed

The current speed is permanently shown on the display.
For a wheel circumference of 2,155 mm, the maximum
possible speed is 199 kmh or 124 mph.

Current altitude

The current altitude is permanently displayed on
the top left.

Current temperature

The current temperature is permanently displayed on
the top right.

ATTENTION:

if the

HEART RATE option

is activated,

the current gradient uphill/downhill is displayed here.

ATTENTION:

if the

CADENCE option

is activated, the current cadence is displayed here.
See page 76.

With

HEART RATE option

With

CADENCE option

Current gradient uphill/downhill

The current gradient uphill/downhill is displayed as
a percentage on the left of the middle line.

Summary of Contents for M6
























































































Search results

Summary of Contents for M6

Reviews:

Related manuals for M6

Brands by name

Popular brands

VDO Cyclecomputing M6, User Manual

Search results

Summary of Contents for M6

Reviews:

Related manuals for M6

Brands by name

Popular brands